QD Bushing

QD Bushing, Series SDS, Bore 1-15/16 In.

  • Item – Tapered and QD Bushings: Quick Detachable Bushing
  • Bore Bushing Series: SDS
  • Bore Dia.: 1 15/16 in
  • Length: 1.313 in
  • SAE Grade: 6
  • Item: Quick Detachable Bushing
  • Bolt Size: 1/4″-20 x 1 3/8″
  • Taper: 3/4 in per ft On Diameter

QD bushing dimensions

  • Bore Dia.: 1 15/16 in
  • Length: 1.313 in
  • SAE Grade: 6
  • Item: Quick Detachable Bushing
  • Bolt Size: 1/4″-20 x 1 3/8″
  • Taper: 3/4 in per ft On Diameter
  • Dimension T: 7/8 in
  • Dimension U: 7/16 in
  • Dimension V: 2 11/16 in
  • Material: Steel, Iron
  • Includes: Cap Screws, Key
  • Bolt Circle Dia.: 3.6875 in
  • Dimension L: 1 5/16 in
  • Length (Straight Wireway): 1.313 in


Advantages of QD Bushings

The QD bushing is a flanged bushing, similar to a split taper bushing, but differs in how it is mounted. Fasteners are not secured by flanges but through shafts or drive components. This design allows two different mounting options, standard, and reverse. However, if installed incorrectly, this system can cause the barrel OD to slip. Also, in large hole sizes, keyways may be shallow or absent.

The advantages of QD bushings include ease of installation and removal. It has a flange of 0.75 inches per foot with a series of tapped holes around the flange. They range in size from H to W and are available in Type 1 and Type 2 versions. The flangeless design is an advantage when space is limited, but problems can arise when the bushing is installed incorrectly, which can cause the drive components to come off the shaft.

Another advantage of QD bushings is their simplicity and clamping force. They require no special tools and can be installed in less than half an hour. These bushings measure 3/4 inch per foot for easy installation. QD bushings are designed to align the sprocket at a 90-degree angle to the drive shaft.